Sitemap  |  Impressum  |  Contact

Notice:Welcome to Henan Sinocean Refractory CO.,LTD.

Product list
News center
HT-1200N Muffle furnace

 

Model:  HT-1200N       
               Sample size: 200x200x200mm (WxHxD)
 
Detailed Description:     
                                                                   
Inside chamber size
200x200x200mm(WxHxD)
Max.Temperature                          
1200.C(within 3 hours)
Working temperature
1100.C
Temperature  accuracy
+ 1.C
Temperature controller
30 segments programmable and auto control
Heating elements
 Fe-Cr-Al Resistance wire
Voltage
220V 50HZ, single phase(customized)
Power
4kw
 
Standard size:
 
 
 
 Type
 Furnace size
 Working / Max. temperature
 Delivery time
HT-1200N
 120x120x130mm
 1100/1200
 1 day (in stock)
HT -1200N
 150x150x150mm
 1100/1200
 1 day (in stock)
HT-1200N
 150x150x200mm
 1100/1200
 1 day (in stock)
HT-1200N
 200x200x200mm
 1100/1200
 1 day (in stock)
HT-1200N
 200x200x300mm
 1100/1200
 1 day (in stock)
HT -1200N
 300x300x300mm
 1100/1200
25 days (out stock)
 HT-1200N
 300x300x400mm
 1100/1200
 1 day (in stock)
 
 
 
 
Remark: Other sizes are available.
 
Product Description
 1. Operation Temperature:  1100.C ( 1200.C Max for short time).
  2. Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation.
  3. Three sides resistance wire coil for fast and uniform heating.
  4. Heavy duty double layer structure with cooling fan.  Lower temperature in outside case.
  5. 0.5" diameter observation window made of quartz glass allow user to see insider chamber during heating operation. 
  6. K type thermocouple installed for immediate use.
  7. Temperature controll unit can be separated from furnace and make moving at easy.
  8. PID automatic control via current limiting phase angle fired the resistor , e.g. SCR ( Silicon Controlled Rectifier)             
  9. Power control with 30 segments programmable.
  10.Vent port installed on the top for gas flow. ( gas outlet)
 
Applications
    1.Gravimetric analysis 
   2. Sintering
   3. Quantitative analysis
   4. Heat treating 
   5. Glass preparation